Reflective sheeting manufacturing at an affordable price.
AURA 144, A microprismatic, metalized reflective tape approved to the requirements of ECE Regulation No. 104, Class C. Contains an aggressive for bonding to many different heavy truck and trailers surfaces.
|Dimensions||131 × 24 × 24 cm|
White, Yellow, Red, Green, Blue, Orange, Brown, Black, Red and White, Black and Yellow
2 years, 5 years, 7 years, 10 years
Temporary Signing, Construction Workzone, Advertising Graphics, Promotional Signing
Most common stardard like ASTM D4956 | AS/NZS 1906.1:2017 | EN12899-1 | GB/T 18833,GOST 32945 | JIS Z 9117
AURA® 144 Conspicuity Tape is a microprismatic retroreflective tape designed for use on the sides of heavy trucks and trailers. It has been approved to the requirements of ECE Regulation No. 104, Class C.
AURA 144 is an omni-rotational product. It can be applied in either a horizontal or vertical position and does not have an orientation marking. Minimum Coefficient of Retroreflection per ECE104, Class C at 0.33° Observation Angle (cd/lx/m2).
Color Entrance Angle (β1 = 0°, β2 = β) 5° 20° 30° 40° 60°
White 450 __ 200 95 16
Yellow 300 __ 130 75 10
Red 120 60 30 10 __
Physical Characteristics & Properties
The typical nighttime retroreflected color as tested in accordance with ECE Regulation No. 48, 2.30 is shown in the table below.
(Illuminant A, 2° observer, 5°/0.33°) Color x y White 0.425 0.400 Yellow 0.527 0.450 Red 0.655 0.330
Available Colors and Roll Sizes
Standard roll sizes are 50mm x 50m. AURA 144 Conspicuity Tape is available in three colors.
Product Code Color 0144-00 White 0144-01 Yellow 0144-02 Red
AURA 144 Conspicuity Tape should be applied only to clean and dry surfaces when temperatures are above 60°F. Wipe surfaces with rubbing alcohol (or similar solvent cleaner) and allow the surface to completely dry prior to application. Wet application methods should not be utilized. Apply only to surfaces free of rust, dirt, loose paint, or other contaminants.
During application, use a hand squeegee or hand roller to apply pressure to create a permanent bond. Starting from one end of the conspicuity striping, work from the center of the tape towards the edge to push air out from under the tape. It may be necessary to wrap the hand squeegee in a cloth to avoid scratching the surface.
The user should always test compatibility of the tape with the intended application surface. For freshly painted surfaces, the paint should be allowed to cure for at least 48-hours prior to application.
Application over large rivets or sharp corrugations is not recommended. For application over smaller rivets (< 1/2 inch), use a punching tool, such as an arch punch or belt punch, to cut the conspicuity tape around the rivet surface.
Store in a cool, dry area. Use within 1-year of receipt of the product.