ECE 104 Conspicuity Tape for Truck

AURA 144, A microprismatic, metalized reflective tape approved to the requirements of ECE Regulation No. 104, Class C. Contains an aggressive for bonding to many different heavy truck and trailers surfaces.

Weight 30 kg
Dimensions 131 × 24 × 24 cm
Color

White, Yellow, Red, Green, Blue, Orange, Brown, Black, Red and White, Black and Yellow

Size

1.22X45.7M, Customized

lifetime

2 years, 5 years, 7 years, 10 years

Application

Temporary Signing, Construction Workzone, Advertising Graphics, Promotional Signing

Test Report

It is all about meeting your local standards

We are specialsts of international standards

Most common stardard like ASTM D4956 | AS/NZS 1906.1:2017 | EN12899-1 | GB/T 18833,GOST 32945 | JIS Z 9117

Independant test report will be provided to show you the real performace.

Details about ECE 104 Conspicuity Tape for Truck

Product Overview

AURA® 144 Conspicuity Tape is a microprismatic retroreflective tape designed for use on the sides of heavy trucks and trailers. It has been approved to the requirements of ECE Regulation No. 104, Class C.

Key Features

  • Metalized, single-ply construction to prevent edge-lifting or delamination
  • No edge sealing required
  • Aggressive, high-tack adhesive for application to painted surfaces and other substrates
  • Tiled microprismatic optics for retroreflectivity from multiple viewing angles

Retroreflection

AURA 144 is an omni-rotational product. It can be applied in either a horizontal or vertical position and does not have an orientation marking. Minimum Coefficient of Retroreflection per ECE104, Class C at 0.33° Observation Angle (cd/lx/m2).

Color Entrance Angle (β1 = 0°, β2 = β) 5° 20° 30° 40° 60°

White                                                           450 __ 200 95 16

Yellow                                                           300 __ 130 75 10

Red                                                                120 60 30 10 __

Physical Characteristics & Properties

  • Durability: Up to 10-years when properly installed. Vertical application only.
  • Retroreflective Elements: Microprisms, metalized with vacuum-deposited aluminum
  • Tape Thickness: 11 mils, excluding release liner
  • Face Film: Acrylic
  • Service Temperatures: -30°C – 70°C (-20°F – 160°F)
  • Adhesive Bond Strength: > 15.0 N/25mm (90° peel test)
  • Corrosion Resistance: No visible deterioration after two salt mist exposure cycles of 24 hours per ASTM B117-18.
  • Solvent Resistance: No visible deterioration (1 minute in 70% n-heptane / 30% toluene)
  • Application Temperature:15°C (60°F) minimum

Color

The typical nighttime retroreflected color as tested in accordance with ECE Regulation No. 48, 2.30 is shown in the table below.

(Illuminant A, 2° observer, 5°/0.33°) Color x y White 0.425 0.400 Yellow 0.527 0.450 Red 0.655 0.330

Available Colors and Roll Sizes

Standard roll sizes are 50mm x 50m. AURA 144 Conspicuity Tape is available in three colors.

Product Code Color 0144-00 White 0144-01 Yellow 0144-02 Red

Application Guidelines

AURA 144 Conspicuity Tape should be applied only to clean and dry surfaces when temperatures are above 60°F. Wipe surfaces with rubbing alcohol (or similar solvent cleaner) and allow the surface to completely dry prior to application. Wet application methods should not be utilized. Apply only to surfaces free of rust, dirt, loose paint, or other contaminants.

During application, use a hand squeegee or hand roller to apply pressure to create a permanent bond. Starting from one end of the conspicuity striping, work from the center of the tape towards the edge to push air out from under the tape. It may be necessary to wrap the hand squeegee in a cloth to avoid scratching the surface.

The user should always test compatibility of the tape with the intended application surface. For freshly painted surfaces, the paint should be allowed to cure for at least 48-hours prior to application.

Application over large rivets or sharp corrugations is not recommended. For application over smaller rivets (< 1/2 inch), use a punching tool, such as an arch punch or belt punch, to cut the conspicuity tape around the rivet surface.

Storage

Store in a cool, dry area. Use within 1-year of receipt of the product.

Details about ECE 104 Conspicuity Tape for Truck

Share on facebook
Share to Facebook
Share on twitter
Share to Twitter
Share on linkedin
Share to LinkedIn